CycleTough® PVC Series Pipe and Fittings (IPSOD)

CycleTough® is specifically designed for irrigation systems and sewer forcemains.

  • High Pressure Capacity
  • Toughness engineered through material reinforcement
  • Bottle-tight Joints with removable gaskets

 

IPEX CycleTough systems are made with the same high-impact, engineered compound as our Blue BruteTM systems, and are tested to maintain the same high standards. Proven in tough North American climates for over 50 years, IPEX PVC pipe systems have an established track record of performance.

Unlike many competing fittings, CycleTough fittings are made with a longlife compound that extends service by 25%. In addition, CycleTough fittings have been engineered using the latest techniques in Finite Element Analysis (FEA), ensuring problem-free performance for the long haul.

 

TOP RESOURCES

Catalogue

Brochure

Technical Manual

Information Bulletins

PRODUCT DETAILS

CycleTough® PVC Series Pipe (IPSOD)

4 - 24" (100 - 600 mm)          SDR41 100 psi (690 kPa)

3 - 24" (75 - 600 mm)            SDR32.5 125 psi (860 kPa)

1-1/2 - 24" (40 - 600 mm)   SDR26 160 psi (1100 kPa)

1-1/2 - 24" (40 - 600 mm) SDR21 200 psi (1380 kPa)

 

CSA B137.3 certified

ASTM D2241

NSF Std. 61 certified

 

Potable water piping

Sewer forcemains

Reclaimed water piping

Golf course irrigation piping

Other irrigation piping

Industrial piping

CycleTough® 4000 Moulded PVC Fittings (IPSOD)

200 psi (1380 kPa)

1-1/2 - 8" (40 - 200 mm)

CSA B137.2 Certified

4000 psi HDB

200 psi Pressure Rating

Potable water systems

Sewage force mains

Golf course and other irrigation

 

CycleTough® 4000 Fabricated PVC Fittings (IPSOD)

160 psi (1100 kPa)

10 - 24" (250 - 600 mm)

CSA B137.3 Certified

 

Potable water piping

Sewer forcemains

Reclaimed water piping

Golf course irrigation piping

Other irrigation piping

SPECIFICATIONS

PIPES

IPSOD PVC pipe shall be manufactured from PVC compound with ASTM D1784 cell class 12454B.

PVC pipe will have a minimum hydrostatic design basis (HDB) of 4000 psi and a short-term strength of 6400 psi. Pipe shall be certified to CSA B137.3.

 

FITTINGS

Injection-moulded PVC fittings shall be made from PVC compound with a minimum HDB of 4000 psi. Fabricated fittings shall be made from sections of pipe certified to CSA B137.3 and fittings shall also be certified to CSA B137.3. All pipes and fittings shall be listed to NSF Standard 61 and shall be colour-coded white.