- Reducing indoor soil gas concentrations and health risks associated with radon gas
- Complete system of gas collection and vent pipes, fittings, solvent cement and venting accessories
- Unique product features, markings and warning labels for ease of identification
Peace of Mind from the Ground UpTM
RadonXTM Soil Gas Venting, is specifically designed, tested and labeled to address the need for collecting and venting radon gas from a dwelling. Focusing on low-rise construction, the RadonX PVC product offering consists of perforated gas collection and non-perforated vent pipes, fittings, solvent cement and termination accessories manufactured to strict quality, performance and dimensional standards.
TOP RESOURCES
Brochure
Catalogue
Technical Manual & Installation Guide
Specification Sheet
Videos
SDS
PRODUCT DETAILS
Available Size
4” (100 mm)
Wall Thickness
Schedule 40
Materials
RadonX pipes and fittings are manufactured from PVC compounds that comply with the material requirements of CSA B181.2 “PVC Drain, Waste and Vent Pipe and Pipe Fittings”.
Cements
RadonX PVC solvent cement meets the performance requirements of ASTM D2564. The ultra low VOC solvent cement is yellow in colour and should only be used with RadonX soil gas venting pipe and fittings.
Installation
RadonX pipe and fittings are designed and tested as a system by IPEX Inc. Mixing of pipe, fittings or joining methods from different manufacturers is not allowed as they have different joint systems and adhesives. These can result in unsafe conditions and cause radon gas leaks. RadonX pipe and fittings must NOT be used for any applications other than soil gas venting.
SPECIFICATIONS
Compliance to Standards
RadonX pipe and fittings comply to all material, dimensional and testing requirements of CSA B181.2 and ASTM D2665. The RadonX piping system complies to gas leakage, pull out, torque and combustibility test requirements of ULC S636.
Code compatibility
RadonX pipe and fittings satisfy the requirements of the Provincial and National Building Codes for soil gas venting.
Markings
In accordance with CGSB/CAN 149.11 and CGSB/CAN 149.12, each length of RadonX pipe is tagged with a warning label. All RadonX fittings are tagged with a warning label against the risk of radon gas leak if system is not installed as per IPEX installation instructions. All RadonX pipe and fittings include identification markers to indicate size, material description, product application, complying standards, date of production and manufacturer’s name or trademark. Both gas collection and vent pipes consist of two yellow print-lines located 180 degrees apart. All RadonX product markings are bilingual.