- Sceptalight LEDs can last beyond 50,000 hrs and offer significant energy savings
- UV-resistant material makes Sceptalight suitable for both indoor and outdoor use
- Temperature and weather-resistant silicone gaskets create a water-tight seal
Whether you’re looking for economical outdoor lighting solutions, corrosion-resistant fixtures for punishing industrial environments or energy-saving LED, Sceptalight fixtures prove themselves to be all-round performers in a variety of indoor and outdoor applications. Sceptalight fixtures are made from a glass-reinforced thermoplastic polyester resin, which enable them to stand up better to corrosive elements than metal. This thermoplastic design marries an unrivaled balance of strength, stiffness and toughness with all the benefits users appreciate of Scepter rigid PVC conduit and fittings – long life, easy servicing and high impact-resistance.
Sceptalight’s thermoplastic construction offers outstanding corrosion and chemical resistance. Silicone gaskets in Sceptalight fixtures – mounted at the base of the globe and within the ceiling box – provide a water- and vapour-tight seal which protects the electrical connections inside.
CSA C22.2 No. 250, UL 1598
Minimum 60ºC supply conductors
LED Light Fixtures: CSA 22.2 250.0 NEMA 4X and IP66
LED Retrofit Light Engines: CSA T.I.L. B-79A and conform to UL 1598C
Hazardous Locations (non-LED fixtures only)
CLASS I, DIV 2 Groups A, B, C & D
CLASS II, DIV 2 Groups F & G
Minimum 90ºC supply conductors
Marine Locations (non-LED fixtures only)
CSA C22.2 No. 250, UL 1598, UL 1598A Minimum 110ºC supply conductors
- Standard clear glass globes are ideal for general purpose area lighting for either indoor or outdoor use.
- Polycarbonate globes offer impact resistance in case of accidental contact and the assurance that work areas are not contaminated by broken glass.
- Colored globes – available in red, blue, green or amber – can transform the light to an indicator or warning light.
- Ceiling Mount
- Wall mount
- Pendant mount
Light fixtures shall be nonmetallic and constructed of 30% glass filled polyester material exhibiting a maximum linear expansion of 1.4x105 in./in./°F. Fixtures shall be assembled with high temperature silicone gaskets, brass inserts and screws. Incandescent light fixtures shall be rated for use with a Maximum 150 Watt incandescent lamp. Compact fluorescent light fixtures shall be of the wattage specified and be supplied complete with lamp and ballast (high power factor, low harmonic electronic for 18 & 26 Watt fixtures and magnetic for 7, 9 & 13 Watt fixtures).
Light fixtures shall be third-party certified to CSA C22.2 No. 9 and C22.2 No. 250 for indoor/outdoor wet location use and where the specified installation requires; Class I Div 2 and Class II Div 2 hazardous location use. LED light fixtures shall be third-party certified to CSA 22.2 250.0. LED light fixtures will also
be NEMA 4X and IP66 rated for wash-down and corrosive environments. LED Retrofit Light Engines shall be certified to CSA T.I.L. B-79A and conform to UL 1598C.
Approved products: Sceptalight LVPE/LVPF/LVPL/LBPE/LPMF/LPPL series light fixtures
manufactured by IPEX Electrical Inc.
Stable Construction - Reinforced support feet offer secure mounting.
Adaptable - Threaded conduit hubs permit connection to nonmetallic and metallic raceways.
Corrosion Resistant - Thermoplastic construction resists attack from acids, alcohols, alkalis, organic solvents, detergents/ cleaners, greases and oils as well as many other types of chemicals.
Durable, Impact Resistant - High-impact nonmetallic guard resists physical impact, chemical attack and heat-induced deformation.