- Simple, reliable joining method
- Wide range of pressure and temperature capabilities
The Duraplus Industrial Piping System by IPEX offers a complete range of ABS pressure pipe, valves and fittings that are ideal for demanding applications ranging from abrasive slurries and separation reagents to caustic processes and low temperature glycol systems. These rugged Duraplus components operate over a wide range of temperatures while delivering excellent material properties including:
- Exceptional Toughness
- Corrosion Resistance
Chemical Resistance Guides
- ABS HVAC Chilling Applications
- Duraplus Double Union Ball Check Valve
- Duraplus Threaded Adapters
- Duraplus VXE True Union Ball Valve
- Glycols used with Duraplus Industrial ABS
IPEX offers matched Duraplus pipes, fittings and valves in IPS sizes ranging from 3/8" to 12" nominal diameter, suitable for pressures up to 230 psi at 73°F (23°C) (depending on the size).
Duraplus ABS is designed for industrial pressure pipe applications where the extremely high-impact resistance and ductility of the material offers some insurance against internal and external shock loadings and site abuse conditions. It’s unique combination of ABS properties – non-toxicity, purity, corrosion- and chemical-resistance,
toughness, low-hydraulic resistance, and the ability to perform over a wide temperature range (-40ºF to +176ºF) ensures excellent in-service performance and system life.
Pipe and fittings shall be manufactured from a copolymeric material – Acrylonitrile Butadiene Styrene (ABS) – conforming to a 43232 cell classification in accordance with ASTM D3965.
Material for both pipe and fittings shall have a design stress of not lessthan 2,000 psi, and shall be designed with a 2 to 1 safety factor for a 50 year lifespan when operated under continuous pressure. The material shall have an izod impact resistance value of not less than 6 ft./lb. at 73ºF and 3 ft./lb. at -22ºF, when tested in accordance with ASTM D256, method ‘A’.
Pipes shall be manufactured by IPEX and designed on a Standard Dimension Ratio (SDR) basis to give various pressure ratings as described below:
Fittings shall be of the socket type, designed for solvent welding as supplied by IPEX.
Fittings shall be designed and manufactured so that they withstand the continuous pressures applicable to the maximum pressure native of the pipe.
All joints shall be made with Gray Duraplus ABS solvent cement as supplied by IPEX.
The solvent cement shall be designed to withstand continuous applied pressures up to 230 psi at 73ºF.
DESIGN AND INSTALLATION
The design and installation of ABS pressure systems shall be performed in accordance with the recommendations detailed in the Handling and Installation section of this manual, local and national regulations where applicable.
To ensure the full integrity of the completed system, all components shall be supplied by IPEX.
Pipe Class SDR Continuous Pressure Rating at 73°F (23°C) Size Range
Class 90 psi SDR 24.0 90 psi (6 bar) 10" & 12"
Class 115 psi SDR 19.0 115 psi (8 bar) 6" & 8"
Class 145 psi SDR 15.5 145 psi (10 bar) 1" to 8"
Class 180 psi SDR 12.5 180 psi (12 bar) 1" to 6"
Class 230 psi SDR 10.0 230 psi (16 bar) 3/8" to 4"
In early 2002, it became clear that maintenance on the grit removal system at the Sacramento Regional Wastewater Treatment Plant (SRWTP) was required. Moving 100+ million gallons per day (MGD) of grit was quickly wearing out the original steel pipes, and replacement was needed.